If you’ve got an Electrolux built-in microwave with the handle coming loose, or perhaps having even fallen off, it is not apparent how to fix it. Hopefully you find this post and it saves you a huge amount of time. My model EW30SO60QSA handle was about to fall off, and there is no obvious way to get to the screws holding it on. I had found reference to other Electrolux owners having removed the glass panel from the front of the microwave door, so mistakenly assumed I needed to do the same. It’s held on with adhesive, so it’s a big painful couple hours with a putty knife removing the adhesive to get the glass free. I found out after the fact that this was not necessary.
The screws that hold the handle on are covered by a non-removable plastic back to the door; it gets snapped on after the glass has been stuck to the door and the handle screwed in. You have to drill holes to get to the screw heads. I didn’t know where exactly they were so cut away way too much material with a Dremel; hopefully this photo helps you know where to drill, just large enough to get the screwdriver through:
If you did already remove the glass, what you’ll need to reattach it is 3M VHB tape RP32 2″: https://amzn.to/2XxzwcS