OSPFv3 between Arista and Brocade or Cisco
Similar to my article about Cisco and Brocade not wanting to interact with each other without a very specific configuration, you’ll likely run into the same issue if you’re trying Continue Reading…
Category: Brocade
Disable server mode NTP on Brocade devices
Not quite sure why anyone would have thought this to be a good idea, but at least on NetIron MLXe devices, if you enable NTP to keep your clocks sync’d, Continue Reading…
Trouble with OSPFv3 between Brocade & Cisco
Note: in my articles, any time I give a config example, parts you need to replace *should* be in red text. Here’s the CliffsNotes version of this article for those Continue Reading…